Screw Tweeter
Jan/100
 |
PylePro - Screw-On Tweeter Driver with 12 oz. Magnet - PDS341 List Price: $32.49 Sale Price: $28.98  |
|
- Midrange/Tweeter Compression Horn Driver - Titanium Diaphragm - 1.35'' (34.4mm) Flat Aluminum Voice Coil - 12 oz Magnet Structure - Frequency Response: 1kHz - 20kHz - Sensitivity: 102dB @ 1W/1M - 8 Ohm Impedance - 200 Watts RMS/400 Watts Peak - Terminals 250 Type - Fits Horns with 1 3 /8'' x 18 TPI Threads |
Screw Tweeter
 |
 4 x 10 Tweeter Horn Lense 1 3 8 14 18 TPI Screw On  US $7.49
|
 10 NTD100 PIEZO TWEETER SCREW ON DRIVERS FOR PA DJ HORN US $9.99
|
 5 x 15 Tweeter Horn Lense 1 3 8 14 18 TPI Screw On US $19.90
|
 1 GMI PRO SCREW ON TWEETER DRIVER 120 OZ MAGNET 2010 US $59.95
|
 GMI PRO SCREW ON TWEETER DRIVER 120 OZ MAGNET 2010 US $57.95
|
 PYLE PDS 442 SCREW ON TWEETER DRIVER 30OZ MGNT WITH 30 US $30.95
|
 PYLE PDS 442 SCREW ON TWEETER DRIVER 30OZ MGNT WITH 30 US $30.95
|
 2 GMI PRO SCREW ON TWEETER DRIVER 120 OZ MAGNET 2010 US $109.95
|
 2 GMI PRO SCREW ON TWEETER DRIVER 60 OZ MAGNET 2010 US $82.95
|
 Pyle Audio PDS 442 PYLE SCREW ON TWEETER US $45.51
|
 Pyle PDS442 Screw on Pro Stereo Tweeter w 30oz Magnet US $41.99
|
 Pyle Audio PDS 541 PYLE SCREW ON TWEETER US $56.19
|
 Pyle Audio PDS 521 PYLE SCREW ON TWEETER US $48.39
|
 2 GMI PRO SCREW ON TWEETER DRIVER 60 OZ MAGNET 2010 US $82.95
|
 PYLE Screw On Tweeter Driver 20 Oz Mgnet PDS342 US $33.99
|
 PYLE PDS 541 SCREW ON MIDRANGE TWEETER DRIVER HORN US $40.95
|
 PYLE PDS 521 SCREW ON TWEETER DRIVER 30OZ MGNT WITH 30 US $32.95
|
 PYLE PDS 541 SCREW ON TWEETER DRIVER 60OZ MGNT MIDRANGE US $40.95
|
 PYLE PDS 521 SCREW ON TWEETER DRIVER 30OZ MGNT WITH 30 US $32.95
|
Making a pair of speakers?
Im thinking about making a pair of speakers but not sure of the details. Im planning on using 1 sub 1 mid and 1 tweeter. Do i need to make seperate enclosures do i need to brace the box what kind of crossover do i need should i just screw the boxs together (using MDF) or make a basic joint? all these and anything else you think i might need to know would be great thanks.
Please read my response to the following Yahoo! Answers question:
http://answers.yahoo.com/question/index?qid=20070602144000AAsRqgw
This should provide you with ample resources to help you get started.
If you're inexperienced with building loudspeakers then you will need to take the time to become reasonably educated with the fundamental concepts and principles of loudspeaker design as well as the proper construction methods and materials before proceeding.
With respect to DIY, custom-built loudspeaker systems you must keep your goals and expectations realistic - simplicity is a good approach for neophytes. Rarely does anyone build their first set of loudspeakers without some misgivings or dissatisfaction afterwards, no matter how trivial. Many serious loudspeaker hobbyists are continuously looking for new ways to improve upon their previous work. If you choose to pursue it I sincerely hope your loudspeaker building endeavor is successful.